Amino paint

The Forbidden City is made of high quality resin paint, pigment composition, amino paint is mainly used for light industrial products, electrical and mechanical equipment and so on the metal surface as a protective coating for decorative. A



The Forbidden City is made of high quality resin paint, pigment composition, amino paint is mainly used for light industrial products, electrical and mechanical equipment and so on the metal surface as a protective coating for decorative. Amino paint with excellent performance, high hardness of paint film, amino paint construction requires high temperature baking, drying at a temperature of 120 degrees, so also called amino baking paint.


[introduction]

 

The paint is dry paint varieties by amino alkyd resin, amino resin, pigments, additives compounded, mainly used for light industrial products, electrical and mechanical equipment and so on the metal surface as a protective coating for decorative.


[Characteristics products
]
 

In the paint film, hard, bright

- amino paint has excellent adhesion
- water, good gas resistance

Supporting the use of - and epoxy ester primer can meet the general requirements, mildew proof, anti salt fog.


[data]
 

Amino paint color

White and colored

Gloss

High light, Ya Guang

Mixing ratio

One component

Solid

More than 55%

Coating thickness

Dry film: 10-20 m/

The consumption of paint

The theoretical value of 23 0.01kg/m/2 m (because the painting environment, the actual construction of the coating method, coating technology, surface condition and structure, different shapes, loss rate will be very different)


[storage]
 

The storage temperature is 0 degrees C -- 40

Amino paint storage period of 1 years

The flash point of 35 DEG C
 

[data construction]
 

Construction method

Airless spray, air spray and dip coating

The amount of dilution

0-10%

Diluent

Amino diluent

Construction temperature

5 -- 40 degrees C

Amino paint primer

Alkyd primer, epoxy ester primer


[ - coating drying time interval]
 

Drying within 1 hours (120 C) 20 m

Spray after standing for 10 minutes, put in a drying box, heating and drying

Amino paint viscosity (SEC NK2#20 C) 15-20 seconds


[surface treatment]

 

The steel surface rust - blasted to SIS Sa2.5 directly after coating

With water - remove salt and other water soluble substances, blowing dust by air

- degrease according to SSPC-SPI solvent cleaning

- remove weld spatter and smooth weld, burr

The amino paint construction confirmed before the surface is clean and dry


[environment construction
]
 

Less than 5 DEG C, continuous humidity is greater than 85% occasions or poorly ventilated to avoid construction in temperature,


[safety]

 

The paint to avoid skin and eye contact

If paint comes into contact with the skin, with warm water and appropriate cleaning agent, if paint comes into contact with the eyes, flush with plenty of water and seek immediate medical attention

To ensure good ventilation

The amino paint products contain flammable substances, please stay away from the spark of the prohibition of smoking in the neighborhood

The fire, the use of carbon dioxide gas, foam, and powder fire extinguisher

- before operation, please refer to the "safety precautions"


[that]

 

The above data is based on the experiment and the construction experience, in view of the conditions of use the amino paint were beyond our control, the use of amino paint is influenced by many factors, so we only to guarantee quality of amino paint



LAST:NO NEXT:Inorganic zinc rich primer

CONTACT US
Tel:0086-400-0567-678 0086-10-61522593 61522563 61570172
Fax:0086-10-61522563 P.C:101107
BEIJING FORBIDDEN CITY PAINT INDUSTRY CO.,LTD